Spray Polyurethane Foam (SPF), a closed-cell, high-density waterproof foam insulation that seamlessly adheres to and waterproofs the entire roof assembly
NO TEAR-OFFS (In most cases)
The high costs of removing and disposing a built-up roof containing asbestos can be eliminated when the spray-in-place Polyurethane Foam Roof System is installed on top.
SEAMLESS, NO LEAK (Monolithic)
Because foam roofing is applied as a liquid (which expands during application), it forms a continuous, seamless, protective barrier around vents, pipes and other protrusions through the roof. This is particularly handy on commercial buildings where many perforations are necessary. It is also self-flashing, thereby eliminating the need and cost of flashing materials. Conventional roofing systems of 20,000 Sq ft can have 15,000 linear feet of seams or over 2 miles of unnecessary liability.
A highly elastic base coat is applied in contrasting color to the top coat to ensure uniform coverage.
An elastomeric coating with superior reflective quality is applied to provide edge-to-edge waterproofing and protection from the sun.
Weight of the polyurethane foam and coating system is approximately 6# per 100 Sq ft vs. 600# per Sq ft of built-up roofing. This allows more flexibility in architectural design and a terrific cost savings since it eliminates the need for structural reinforcement of a building to carry the weight load of other types of materials.
Additional foam can be added to ensure positive slope to drain.
In combination with a protective coating, foam roofing is very resistant to weather and storm damage, and requires minimal maintenance and repair.
The Spray Foam Roof Explained
Foam roofing requires infrequent maintenance checks, and repairs are minimal in most cases. Depending on the foam roofing material and roof surroundings (trees, vegetation & debris) a roof inspection may not be necessary for 5 years. The protective coating may need to be reapplied periodically depending on wear. Should the foam roof become damaged from storm debris, immediate repair is recommended to avoid leaks and other problems that may compromise your building. Most repairs are mechanical damage from service personal maintaining heating and cooling roof units. These repairs can easily be done by in house personal without voiding the Manufacturers Warranty. Damage is easily detected and repaired with pigmented sealant (caulk).
Can be applied rapidly with little or no disruption to the facilities.
Eliminates the need for multiple levels of roofing required by conventional systems.
Conforms to all roof shapes and types.
Can be applied directly over asphalt, shingles, built-up roofs, EPDM, clay tile, concrete, metal and wood.
Produces energy savings of 30% compared to alternative roofing systems.
Evens out roof surfaces so there are no dips where water can collect.
Self-flashing and seamless – therefore no leaks.
Requires minimal upkeep to remain under warranty. (Warranty must be purchased separately) These warranties are non-prorated and cover labor and material. Warranties are renewable and transferable.
Warranty service calls require a deductible.
Spray foam roof
Polyurethane Foam / Single-Ply Protective Coatings
Single-Ply Restorations / Service Call Repairs
All your roofing and insulation needs in one place.
Exceptional Spray Foam & Coating Service
COPYRIGHT © 2016 MIDWEST URETHANE INC. ALL RIGHTS RESERVED.
Spray foam roof