Protect Your Existing Roofing Investment

It adheres to a variety of substrates whether your roof is large or small; flat or sloped; existing elastomeric roof coating; metal roof; mineral capsheet; Weathered single-ply membrane (EPDM, Hypalon, TPO, CPA, CPE, CSPE, APP or SBS) and Polyurethane foam roof systems.

Prevent Costly Tear Offs

Installing our foam and/or coating system can restore your weathered roof. It will not only extend its life but you avoid the need for a time consuming and costly tear-off.

Midwest Urethane, Inc.

Seamless, No Leak (Monolithic)

Because foam roofing is applied as a liquid (which expands during application), it forms a continuous, seamless, protective barrier around vents, pipes, and other protrusions through the roof. This is particularly handy in commercial buildings where many perforations are necessary. It is also self-flashing, thereby eliminating the need and cost of flashing materials. Conventional roofing systems of 20,000 Sq ft can have 15,000 linear feet of seams or over 2 miles of unnecessary liability.

Base Coat

A highly elastic coat that is applied in contrasting color to the top coat to ensure uniform coverage.

Top Coat

An elastomeric coating with superior reflective quality is applied to provide edge-to-edge waterproofing and protection from the sun.

The Benefits

  • It can be applied with little or no disruption to the facility
  • Eliminates the need for multiple levels of  roofing required by conventional systems
  • Conforms to all roof shapes and types
  • Additional foam can be added to ensure a positive slope-to-drain
Midwest Urethane, Inc.

Warranties

  • Manufacturer material only warranties
  • Manufacturers full system warranties =
    • Covers labor & materials 
    • Single source
    • Renewable 
    • Transferable 
    • Non pro-rated
Midwest Urethane, Inc.

Easy Maintenance

Foam roofing requires infrequent maintenance checks, and repairs are minimal in most cases. Depending on the foam roofing material and roof surroundings (trees, vegetation & debris), a roof inspection may not be necessary for 5 years. The protective coating may need to be reapplied periodically depending on wear. Should the foam roof become damaged from storm debris, immediate repair is recommended to avoid leaks and other problems that may compromise your building. Most repairs are mechanical damage from service personal maintaining heating and cooling roof units. These repairs can easily be done by in-house personal without voiding the Manufacturer's Warranty. Damage is easily detected and repaired with pigmented sealant (caulk).